This product is no longer in stock
Just the finishing touch for all those 'twinkly, sparkly' bits and edges. This chrome effect spray paint can be used on wood, metal, aluminium, glass, stone and various types of plastics (treated & untreated). PERFECT for restoration of old headlamp reflectors!
Please note: This paint is not rub resistant and so we advise not to use it somewhere that comes into contact i.e gear knobs, steering wheels, etc...
Before use, carefully read the directions on the packaging and act accordingly.
The surface should be clean, dry and free of grease. Remove loose old lacquer and rust and sand the surface. Apply a layer of primer suitable for the surface. After drying, sand the base layer (grain 600).
The surface should be clean, dry and free of grease. The aerosol should be at room temperature. Best processing temperature 15 to 25°C. Before use, shake the aerosol for 2 minutes and spray a sample. Distance to the surface to be treated approximately 25 to 30 centimetre.
Apply the spray in several thin layers. Shake the aerosol before applying each layer.
After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds). The drying time depends on the ambient temperature, the humidity of the air and the thickness of the lacquer applied.